Disc Plough Bearing Housing-manufacture,factory,supplier from China

(Total 24 Products for Disc Plough Bearing Housing)
Product descriptions from the supplierOverview            Agricultural machine parts disc harrow bearing house brazil bearing assembly          Product DescriptionDuo-Cone mechanical seals.Taper roller bearings to absorb load in two ways - axial & radial.Low maintenance.Long life span.Total length 178-248mm, Weight 12-24kg
  Contacta ahora
Agricultural Disc Harrow Oil bathed bearing assembly  PRODUCT OVERVIEW   
  Contacta ahora
Install bridge bearings on the half shaft to attenuate vibration and protect the half shaft and other components.The half shaft (drive shaft) is subjected to alternating stresses such as torsion, shear, tension and compression, and impact, which can also cause torsional and bending vibrations of the drive shaft, resulting in additional stresses; Uneven stress distribution; There is sliding friction between the drive shaft neck and the bearing.The shaft that transfers torque between the half shaft gearbox reducer and the drive wheel (previously mostly solid, but due to the easier control of une
  Contacta ahora
PRODUCT DESCRIPTION                                                Yucheng Hengshing Machinery Co.,Ltd, professionaly manufacture agricultural implements and spare parts including disc blades, harrow bearing assembly, harrow shaft, plough hubs etc. which are exported to more than 70 countries of America, Thailand, Bolivia, Chile, Peru, Australia, South Africa, Tanzania, Nigeria, Ghana, Sudan, Botswana, Zambia, Zimbabwe etc.
  Contacta ahora
The half shaft is used to transfer power between the differential and the drive wheels. The half shaft of a regular non disconnecting drive axle can be divided into three types: fully floating, 3/4 floating, and semi floating depending on the external support form.Expand the information on car drive shafts and design a transmission device for driving wheels located at the end of the car's transmission system. Its function is to transmit torque from the differential half shaft gear to the driving wheels.
  Contacta ahora
Product descriptions from the supplier:PRODUCT DESCRIPTION:The half shaft is used to transfer power between the differential and the drive wheels. The half shaft of a regular non disconnecting drive axle can be divided into three types: fully floating, 3/4 floating, and semi floating depending on the external support form.Expand the information on car drive shafts and design a transmission device for driving wheels located at the end of the car's transmission system. Its function is to transmit torque from the differential half shaft gear to the driving wheels.
  Contacta ahora
Product descriptions from the supplierOverview Disc Harrow Spare Parts Disc Blade Boron Disc 26inch 28inch Notched Harrow blade    PRODUCT DESCRIPTION                                              Yucheng Hengshing Machinery Co.,Ltd, professionaly manufacture agricultural implements and spare parts including disc blades, harrow bearing assembly, harrow shaft, plough hubs etc.
  Contacta ahora
Product descriptions from the supplier Overview ----Product Description----    1LY Disc plough is specially designed , manufactured and borrowed according the features of foreign disc plough, it is  Fully-suspended with four wheel tractor. And the discs are rotary motion when tuning the soil.
  Contacta ahora
----Product Description----1LY Disc plough is specially designed , manufactured and borrowed according the features of foreign disc plough, it is  Fully-suspended with four wheel tractor. And the discs are rotary motion when tuning the soil.
  Contacta ahora
1LY Disc plough is specially designed , manufactured and borrowed according the features of foreign disc plough, it is  Fully-suspended with four wheel tractor. And the discs are rotary motion when tuning the soil. This mounted disk plow is especially suitable for cultivation in the land with weeds, stems and frictional soil with bricks .   Modelunit1LY-21LY-31LY-41LY-5Working   widthmm60090012001500Working   depthmm250~300Q’   ty of disc2345Total   weightkg350400470560  Matched powerhp406080120LinkageThree-point   suspension II type
  Contacta ahora
----Product Description---- 1LY Disc plough is specially designed , manufactured and borrowed according the features of foreign disc plough, it is  Fully-suspended with four wheel tractor. And the discs are rotary motion when tuning the soil.
  Contacta ahora
Disc plough is matched with four-wheel tractor, the discs of plough are revolving to furrow the land during operation..
  Contacta ahora
----Product Description---- 1LYA Series paddy field disc plough is designed according to the feature of soil with moisture and more weeds in Southeast Asia ,especially suitable for  cultivation in the land with more weeds and bricks. Advantages:l   it is a mounted paddy disc plough for 4-wheel tractor.l   Suitable for cultivating the farm field with more weeds,stones or bricks.l   No Winding grass ,no block and no hip building-up.l   This disc plough is also for dry field.
  Contacta ahora
----Product Description----1LY Disc plough is specially designed , manufactured and borrowed according the features of foreign disc plough, it is  Fully-suspended with four wheel tractor. And the discs are rotary motion when tuning the soil.
  Contacta ahora
 Disc plough is matched with four-wheel tractor, the discs of plough are revolving to furrow the land during operation..
  Contacta ahora
1.In general, the efficiency of using axle bearings is similar to that of power and lubrication bearings, but the rocker arm hybrid lubrication bearings are much higher.2. The radial clearance of the axle bearing is relatively small, and the radial angular contact bearing can be pre tightened with pre tightening force to eliminate the clearance, resulting in high performance during operation.Compared to bearings of the same type, axle bearings have a smaller width and a compact structure.4.
  Contacta ahora
1LY Disc plough is specially designed , manufactured and borrowed according the features of foreign disc plough, it is  Fully-suspended with four wheel tractor. And the discs are rotary motion when tuning the soil. This mounted disk plow is especially suitable for cultivation in the land with weeds, stems and frictional soil with bricks .Modelunit1LY-21LY-31LY-41LY-5Working   widthmm60090012001500Working   depthmm250~300Q’   ty of disc2345Total   weightkg350400470560Matched powerhp406080120LinkageThree-point   suspension II type
  Contacta ahora
1LY Disc plough is specially designed , manufactured and borrowed according the features of foreign disc plough, it is  Fully-suspended with four wheel tractor. And the discs are rotary motion when tuning the soil. This mounted disk plow is especially suitable for cultivation in the land with weeds, stems and frictional soil with bricks .Modelunit1LY-21LY-31LY-41LY-5Working   widthmm60090012001500Working   depthmm250~300Q’   ty of disc2345Total   weightkg350400470560Matched powerhp406080120LinkageThree-point   suspension II type
  Contacta ahora
Product descriptions from the supplier:----Product Description----  1LYA Series paddy field disc plough is designed according to the feature of soil with moisture and more weeds in Southeast Asia ,especially suitable for  cultivation in the land with more weeds and bricks. Advantages:l   it is a mounted paddy disc plough for 4-wheel tractor.l   Suitable for cultivating the farm field with more weeds,stones or bricks.l   No Winding grass ,no block and no hip building-up.l   This disc plough is also for dry
  Contacta ahora
The half shaft is used to transfer power between the differential and the drive wheels. The half shaft of a regular non disconnecting drive axle can be divided into three types: fully floating, 3/4 floating, and semi floating depending on the external support form.Expand the information on car drive shafts and design a transmission device for driving wheels located at the end of the car's transmission system. Its function is to transmit torque from the differential half shaft gear to the driving wheels.
  Contacta ahora
1LY Disc plough is specially designed , manufactured and borrowed according the features of foreign disc plough, it is  Fully-suspended with four wheel tractor. And the discs are rotary motion when tuning the soil. This mounted disk plow is especially suitable for cultivation in the land with weeds, stems and frictional soil with bricks .  Modelunit1LY-21LY-31LY-41LY-5Working   widthmm60090012001500Working   depthmm250~300Q’   ty of disc2345Total   weightkg350400470560  Matched powerhp406080120LinkageThree-point   suspension II type
  Contacta ahora
Agricultural tools 1LY Series Disk Plow  ----Product Description----1LY Disc plough is specially designed , manufactured and borrowed according the features of foreign disc plough, it is  Fully-suspended with four wheel tractor. And the discs are rotary motion when tuning the soil.
  Contacta ahora
1.In general, the efficiency of using axle bearings is similar to that of power and lubrication bearings, but the rocker arm hybrid lubrication bearings are much higher.2. The radial clearance of the axle bearing is relatively small, and the radial angular contact bearing can be pre tightened with pre tightening force to eliminate the clearance, resulting in high performance during operation.Compared to bearings of the same type, axle bearings have a smaller width and a compact structure.4.
  Contacta ahora
Relate News
What is a disc plough used for?The disc plough is designed to work in all types of soil for functions such as soil breaking, soil raising, soil turning and soil mixing. It is used to open the new fields and to process the stony areas. It can be used easily at rocky and rooted areas.
A chisel plough is capable of penetrate, split, and level soil even over rocky, hard, or wetland, unlike the normal plough.The chisel plough plays the initial loosening of the soil while leaving the trash on top.Not like the disc plough that reverts natural count number from constructing at the soil, chisel maintains the organic depend from the soil and lessens soil erosion.
(1)High hardness discs with 65Mn Spring steel material make perfect soil deep cultivating. (2)The plough discs are rotated during work, no entangle the grass and no block(3)Surface sprayed treatment, beautiful appearance, not easy to fade(4)Widely applications for cultivated or hard land, universally used for 60hp to 160hp tractors(5)Strong construction, big bolts and nuts, high quality spare parts, resonable design make this plough excellent work and long service life. 
It is a installed adverse mild disc harrow for 30-60hp.High performanceRobust capability of soil pulverizationThe tractor with out deflective trailed pressureThe operating depth of this established mild disk harrow can be adjusted freely though adjust the perspective between the disc body.
This baldan disc plough is very popular by customers and widely application.It is standard 3 point linkage with four wheel tractors from 60hp to 160hp. The discs are rotary motion when tuning the soil.
This hydraulic offset heavy disc harrow is trailed for 90-180hp tractor.Very own hydraulic device to boost and down the shipping wheel freely.Excessive great of difunctional oil cylinder.Extensively operating width of this heavy disc harrow.
3QL series ridging plough is mainly suitable for ridging after the tillage in the field for potato, beans, vegetable etc. It is convenient to adjust the angle, the ridging height and the ridging rows. It can be easily spaced (widened or narrowed) as per the crop requirement.
Supplying high quality harrow and plough's spare parts, including discs, hubs, bearings, spacers, harrow shafts etc. We can also customize the parts according to sample or drawing. 
Rotary tillage part is the most commonly used tillage part of micro-tiller, and the engine power drives the rotary tillage cutter shaft to rotate through the transmission device. Rotary tillage knife shaft is horizontally arranged, and several rotary tillage blades are arranged on the circumference of the knife shaft. The transmission of the knife shaft has two forms: middle transmission and side transmission.
I. Adjustment of tillage depth of deep ploughing plough:Generally speaking, the tillage depth of deep ploughs should not be less than 10cm. Rotary tiller matched with walking tractor can adjust the depth of cultivated land by changing the height of tail wheel. When adjusting, just turn the adjusting handle.The ploughing depth is controlled by the hydraulic system of the deep ploughing machine matched with the wheeled tractor.