Disc Plough Bearing Price-manufacture,factory,supplier from China

Product descriptions from the supplierOverview            Agricultural machine parts disc harrow bearing house brazil bearing assembly          Product DescriptionDuo-Cone mechanical seals.Taper roller bearings to absorb load in two ways - axial & radial.Low maintenance.Long life span.Total length 178-248mm, Weight 12-24kg

Install bridge bearings on the half shaft to attenuate vibration and protect the half shaft and other components.The half shaft (drive shaft) is subjected to alternating stresses such as torsion, shear, tension and compression, and impact, which can also cause torsional and bending vibrations of the drive shaft, resulting in additional stresses; Uneven stress distribution; There is sliding friction between the drive shaft neck and the bearing.The shaft that transfers torque between the half shaft gearbox reducer and the drive wheel (previously mostly solid, but due to the easier control of une

Agricultural Disc Harrow Oil bathed bearing assembly  PRODUCT OVERVIEW   

The half shaft is used to transfer power between the differential and the drive wheels. The half shaft of a regular non disconnecting drive axle can be divided into three types: fully floating, 3/4 floating, and semi floating depending on the external support form.Expand the information on car drive shafts and design a transmission device for driving wheels located at the end of the car's transmission system. Its function is to transmit torque from the differential half shaft gear to the driving wheels.

PRODUCT DESCRIPTION                                                Yucheng Hengshing Machinery Co.,Ltd, professionaly manufacture agricultural implements and spare parts including disc blades, harrow bearing assembly, harrow shaft, plough hubs etc. which are exported to more than 70 countries of America, Thailand, Bolivia, Chile, Peru, Australia, South Africa, Tanzania, Nigeria, Ghana, Sudan, Botswana, Zambia, Zimbabwe etc.

Product descriptions from the supplier:PRODUCT DESCRIPTION:The half shaft is used to transfer power between the differential and the drive wheels. The half shaft of a regular non disconnecting drive axle can be divided into three types: fully floating, 3/4 floating, and semi floating depending on the external support form.Expand the information on car drive shafts and design a transmission device for driving wheels located at the end of the car's transmission system. Its function is to transmit torque from the differential half shaft gear to the driving wheels.

1.In general, the efficiency of using axle bearings is similar to that of power and lubrication bearings, but the rocker arm hybrid lubrication bearings are much higher.2. The radial clearance of the axle bearing is relatively small, and the radial angular contact bearing can be pre tightened with pre tightening force to eliminate the clearance, resulting in high performance during operation.Compared to bearings of the same type, axle bearings have a smaller width and a compact structure.4.

The half shaft is used to transfer power between the differential and the drive wheels. The half shaft of a regular non disconnecting drive axle can be divided into three types: fully floating, 3/4 floating, and semi floating depending on the external support form.Expand the information on car drive shafts and design a transmission device for driving wheels located at the end of the car's transmission system. Its function is to transmit torque from the differential half shaft gear to the driving wheels.

1.In general, the efficiency of using axle bearings is similar to that of power and lubrication bearings, but the rocker arm hybrid lubrication bearings are much higher.2. The radial clearance of the axle bearing is relatively small, and the radial angular contact bearing can be pre tightened with pre tightening force to eliminate the clearance, resulting in high performance during operation.Compared to bearings of the same type, axle bearings have a smaller width and a compact structure.4.

1.In general, the efficiency of using axle bearings is similar to that of power and lubrication bearings, but the rocker arm hybrid lubrication bearings are much higher.2. The radial clearance of the axle bearing is relatively small, and the radial angular contact bearing can be pre tightened with pre tightening force to eliminate the clearance, resulting in high performance during operation.Compared to bearings of the same type, axle bearings have a smaller width and a compact structure.4.

Product descriptions from the supplierOverview Disc Harrow Spare Parts Disc Blade Boron Disc 26inch 28inch Notched Harrow blade    PRODUCT DESCRIPTION                                              Yucheng Hengshing Machinery Co.,Ltd, professionaly manufacture agricultural implements and spare parts including disc blades, harrow bearing assembly, harrow shaft, plough hubs etc.

1BZ series of Hydraulic offset heavy disc harrow is well suitable for heavy clay soil, waste land and weedy field as well ,mainly suitable for stubble cleaning before farming , it can break the hardened soil and  return the chopped straw to the soil, and  also can crash the soil after tillage and level the land.

Disc harrow is mainly applicable to clean the crop residue before tillage, break the hardened soil and return the chopped straw to the soil, and  also can crash the soil after tillage and level the land.It can be used as tillage machine instead of plow on the cultivated land. With the efficient productivity, reasonable utilization of the power, great ability of cutting and shattering the soil , the soil surface is smooth and loosening after harrowing, it is well suitable for heavy clay soil, waste land and weedy field as well.

Product descriptions from the supplier Overview ----Product Description----    1LY Disc plough is specially designed , manufactured and borrowed according the features of foreign disc plough, it is  Fully-suspended with four wheel tractor. And the discs are rotary motion when tuning the soil.

----Product Description----1LY Disc plough is specially designed , manufactured and borrowed according the features of foreign disc plough, it is  Fully-suspended with four wheel tractor. And the discs are rotary motion when tuning the soil.

1)Wet cylinderThe location bores and particularly the running surfaces in the cylinder block must be cleaned carefully and they must be undamaged. Corroded surfaces must be reworked (used flange liners and outer diameter oversize liners). As this is done, make sure that the liners moves in easily and that they take up the correct position (the projecting length of the liner must be in accordance with the regulations of the engine manufacture).

1LY Disc plough is specially designed , manufactured and borrowed according the features of foreign disc plough, it is  Fully-suspended with four wheel tractor. And the discs are rotary motion when tuning the soil. This mounted disk plow is especially suitable for cultivation in the land with weeds, stems and frictional soil with bricks .   Modelunit1LY-21LY-31LY-41LY-5Working   widthmm60090012001500Working   depthmm250~300Q’   ty of disc2345Total   weightkg350400470560  Matched powerhp406080120LinkageThree-point   suspension II type

Model9GDM-1.259GDM-1.359GDM-1.65Tractor power required (HP)25-4035-5045-60Cutting width (m)1.251.351.65Quantity of drum disc222Work efficiency (km/h)151515Quantity of blades 666Cutting blade size (mm)47*100*347*100*347*100*3Cutting blade material 65Mn65Mn65MnPTO rotation speed (r/min)540540540Drum rotation speed (r/min)162016201620Overall dimension （mm)2300*800*10502400*850*10503000*900*1100Weight（Kg）330350448

1LY Disc plough is specially designed , manufactured and borrowed according the features of foreign disc plough, it is  Fully-suspended with four wheel tractor. And the discs are rotary motion when tuning the soil.

 Disc plough is matched with four-wheel tractor, the discs of plough are revolving to furrow the land during operation..

 Disc plough is matched with four-wheel tractor, the discs of plough are revolving to furrow the land during operation..

Disc plough is matched with four-wheel tractor, the discs of plough are revolving to furrow the land during operation..

1LY Disc plough is specially designed , manufactured and borrowed according the features of foreign disc plough, it is  Fully-suspended with four wheel tractor. And the discs are rotary motion when tuning the soil. This mounted disk plow is especially suitable for cultivation in the land with weeds, stems and frictional soil with bricks .Modelunit1LY-21LY-31LY-41LY-5Working   widthmm60090012001500Working   depthmm250~300Q’   ty of disc2345Total   weightkg350400470560Matched powerhp406080120LinkageThree-point   suspension II type