Daewoo Tico Car Cylinder Lines Nissan Toyota Engine Cylinder Cover Parts-manufacture,factory,supplier from China

1)Wet cylinderThe location bores and particularly the running surfaces in the cylinder block must be cleaned carefully and they must be undamaged. Corroded surfaces must be reworked (used flange liners and outer diameter oversize liners). As this is done, make sure that the liners moves in easily and that they take up the correct position (the projecting length of the liner must be in accordance with the regulations of the engine manufacture).

1)Wet cylinderThe location bores and particularly the running surfaces in the cylinder block must be cleaned carefully and they must be undamaged. Corroded surfaces must be reworked (used flange liners and outer diameter oversize liners). As this is done, make sure that the liners moves in easily and that they take up the correct position (the projecting length of the liner must be in accordance with the regulations of the engine manufacture).

The half shaft is used to transfer power between the differential and the drive wheels. The half shaft of a regular non disconnecting drive axle can be divided into three types: fully floating, 3/4 floating, and semi floating depending on the external support form.Expand the information on car drive shafts and design a transmission device for driving wheels located at the end of the car's transmission system. Its function is to transmit torque from the differential half shaft gear to the driving wheels.

Product descriptions from the supplier:PRODUCT DESCRIPTION:The half shaft is used to transfer power between the differential and the drive wheels. The half shaft of a regular non disconnecting drive axle can be divided into three types: fully floating, 3/4 floating, and semi floating depending on the external support form.Expand the information on car drive shafts and design a transmission device for driving wheels located at the end of the car's transmission system. Its function is to transmit torque from the differential half shaft gear to the driving wheels.

The half shaft is used to transfer power between the differential and the drive wheels. The half shaft of a regular non disconnecting drive axle can be divided into three types: fully floating, 3/4 floating, and semi floating depending on the external support form.Expand the information on car drive shafts and design a transmission device for driving wheels located at the end of the car's transmission system. Its function is to transmit torque from the differential half shaft gear to the driving wheels.

1LF hydraulic reversible plow is mounted with four-wheel tractor; it is used for the loam,sand loam , cultivated and dry land ,it can finish the furrowing work in double way.Model1LF-3301LF-4301LF-5301LF-3351LF-4351LF-535Working widthmm90012001500105014001750Working depthmm220-270Number of bottoms68106810Total weightkg5807509506208001000Matched powerhp507080557590LinkageThree-point suspension II type ,hydraulic output(difunctional oil cylinder),oil connection in 1/2” thread

1LF hydraulic reversible plow is mounted with four-wheel tractor; it is used for the loam,sand loam , cultivated and dry land ,it can finish the furrowing work in double way.Model1LF-3301LF-4301LF-5301LF-3351LF-4351LF-535Working widthmm90012001500105014001750Working depthmm220-270Number of bottoms68106810Total weightkg5807509506208001000Matched powerhp507080557590LinkageThree-point suspension II type ,hydraulic output(difunctional oil cylinder),oil connection in 1/2” thread

1LY(SX) Series Hydraulic reversible disc plough is matched with four wheel tractor, the discs of plough are revolving to furrow the land during operation.,it can come true the plowing work in double way. Especially suitable for the operation in the  land which have the weeds, stems, frictional soil , small brick .Modelunit1LY(SX)-3251LY(SX)-4251LY(SX)-525Working widthmm75010001250Working depthmm250~300Q’ty of disc345Total weightkg600720820Matched powerhp5090-120130-150LinkageThree-point suspension II type; hydraulic output ( difunctional oil cylinder; oil con

Product descriptions from the supplierOverview            Agricultural machine parts disc harrow bearing house brazil bearing assembly          Product DescriptionDuo-Cone mechanical seals.Taper roller bearings to absorb load in two ways - axial & radial.Low maintenance.Long life span.Total length 178-248mm, Weight 12-24kg

Product descriptions from the supplierOverviewProduct Description Maize thresher machine was used for shelling corn.It with 12hp diesel engine, the machine also can work with tractor.It with big wheel,so you can move it easily.Maize threshing equipment with 2800kg-4600kg/h capacity.The thresher rate is more than 99%. ModelUnit5TY-0.55TY-4.55TY-850 Efficiencykg/h500-20002500-4500≥5000 Threshing rate%≥97Breakage rate%≤2Rotation speed of main shaftr/min1000 Total weightkg230330360 Matched powerhp81215The items selectable Matched for tractor diesel engine or elec

9GL hay rake, matching with a small four-wheel tractor, is mainly used for the hay collecting operations after mowing. The implement adopts a hydraulic overturning mechanism and spring steel rake fingers. During the working process, the rake fingers can be overturned by the hydraulic overturning mechanism so as to realize the offloading of the hay. ModelUnit9GL-1.49GL-1.69GL-1.89GL-2.1Working widthmm1400160018002100Total weightkg9095100110Matched powerhp15-30Linkage2 point to support , tipping single action oil cylinder oil connection in 1/2”thread 

9GL hay rake, matching with a small four-wheel tractor, is mainly used for the hay collecting operations after mowing. The implement adopts a hydraulic overturning mechanism and spring steel rake fingers. During the working process, the rake fingers can be overturned by the hydraulic overturning mechanism so as to realize the offloading of the hay. ModelUnit9GL-1.49GL-1.69GL-1.89GL-2.1Working widthmm1400160018002100Total weightkg9095100110Matched powerhp15-30Linkage2 point to support , tipping single action oil cylinder oil connection in 1/2”thread 

PRODUCT DESCRIPTION                                                Yucheng Hengshing Machinery Co.,Ltd, professionaly manufacture agricultural implements and spare parts including disc blades, harrow bearing assembly, harrow shaft, plough hubs etc. which are exported to more than 70 countries of America, Thailand, Bolivia, Chile, Peru, Australia, South Africa, Tanzania, Nigeria, Ghana, Sudan, Botswana, Zambia, Zimbabwe etc.

1LY(SX) Series Hydraulic reversible disc plough is matched with four wheel tractor, the discs of plough are revolving to furrow the land during operation.,it can come true the plowing work in double way. Especially suitable for the operation in the  land which have the weeds, stems, frictional soil , small brick .Modelunit1LY(SX)-3251LY(SX)-4251LY(SX)-525Working widthmm75010001250Working depthmm250~300Q’ty of disc345Total weightkg600720820Matched powerhp5090-120130-150LinkageThree-point suspension II type; hydraulic output ( difunctional oil cylinder; oil con

Product descriptions from the supplierOverview Disc Harrow Spare Parts Disc Blade Boron Disc 26inch 28inch Notched Harrow blade    PRODUCT DESCRIPTION                                              Yucheng Hengshing Machinery Co.,Ltd, professionaly manufacture agricultural implements and spare parts including disc blades, harrow bearing assembly, harrow shaft, plough hubs etc.

1LF hydraulic reversible plow is mounted with four-wheel tractor; it is used for the loam,sand loam , cultivated and dry land ,it can finish the furrowing work in double way.Model1LF-3301LF-4301LF-5301LF-3351LF-4351LF-535Working widthmm90012001500105014001750Working depthmm220-270Number of bottoms68106810Total weightkg5807509506208001000Matched powerhp507080557590LinkageThree-point suspension II type ,hydraulic output(difunctional oil cylinder),oil connection in 1/2” thread

ModelUnit5TD-1255TD-1005TD-705TD-50Fitted powerKW11-137.5-117.55.5-7.5Fitted powerHP1515128Total weightkg450420260150Rotating speed of the rollerr/min1000106012001400Fan rotating speedr/min250024002500Total loss rate％wheat ≤1.5           rice ≤3.0Breakage％≤1.5Impurity％≤2.0productivityKg/ kwh≤130

1LY(SX) Series Hydraulic reversible disc plough is matched with four wheel tractor, the discs of plough are revolving to furrow the land during operation.,it can come true the plowing work in double way. Especially suitable for the operation in the  land which have the weeds, stems, frictional soil , small brick . Modelunit1LY(SX)-3251LY(SX)-4251LY(SX)-525Working widthmm75010001250Working depthmm250~300Q’ty of disc345Total weightkg600720820Matched powerhp5090-120130-150LinkageThree-point suspension II type; hydraulic output ( difunctional oil cylinder; o

9GL hay rake, matching with a small four-wheel tractor, is mainly used for the hay collecting operations after mowing. The implement adopts a hydraulic overturning mechanism and spring steel rake fingers. During the working process, the rake fingers can be overturned by the hydraulic overturning mechanism so as to realize the offloading of the hay. ModelUnit9GL-1.49GL-1.69GL-1.89GL-2.1Working widthmm1400160018002100Total weightkg9095100110Matched powerhp15-30Linkage2 point to support , tipping single action oil cylinder oil connection in 1/2”thread 

Our corn /maize thresher is widely applied for livestock breeding, farms, and household use. It is used shelling Maize from cobs. The machine separates the kernels from the crops with an amazing speed without any breakage of the kernels as well as cobs.There are two types of power for them: diesel engine or electric motor. You can choose each type in your need.This maize  threshing machine is quite simple and having high output.

9GL hay rake, matching with a small four-wheel tractor, is mainly used for the hay collecting operations after mowing. The implement adopts a hydraulic overturning mechanism and spring steel rake fingers. During the working process, the rake fingers can be overturned by the hydraulic overturning mechanism so as to realize the offloading of the hay.ModelUnit9GL-1.49GL-1.69GL-1.89GL-2.1Working widthmm1400160018002100Total weightkg9095100110Matched powerhp15-30Linkage2 point to support , tipping single action oil cylinder oil connection in 1/2”thread

9GL hay rake, matching with a small four-wheel tractor, is mainly used for the hay collecting operations after mowing. The implement adopts a hydraulic overturning mechanism and spring steel rake fingers. During the working process, the rake fingers can be overturned by the hydraulic overturning mechanism so as to realize the offloading of the hay.ModelUnit9GL-1.49GL-1.69GL-1.89GL-2.1Working widthmm1400160018002100Total weightkg9095100110Matched powerhp15-30Linkage2 point to support , tipping single action oil cylinder oil connection in 1/2”thread

Product descriptions from the supplier:Overview:Spring tine cultivator parts   Product Description The three point hitch mounted spring tine cultivator is one of the simplest and most useful cultivation and tillage tools you can own. The tractor mounted spring tine cultivator loosens the soil for quick and easy surface cultivation to easily prepare a seed bed for planting.The S-shaped tine spacing on the tool bar is adjustable to allow you to align the cultivator tines with your crop row spacing.