culivator-manufacture,factory,supplier from China

(Total 24 Products for culivator)
Model 9G series of sickle bar mower takes advantage of the offset crank link mechanism to drive the cutter blade mow grass, and it is adequate for cutting the natural and planted grasses in ranch, mountain and hilly area. The structure of this machine is compact and the operation is easy and reliable and the residues is lower after cutting.Modelunit9G-1.49G-1.69G-1.89G-2.1Working widthmm1400160018002100Working depthmm50-80PTO Rotation speedr/min540PTO shaft  spline6 splineTotal weightkg120124128135Matched powerhp12-2015-2020-3020-30LinkageThree-point suspension I type
  Contacta ahora
Model 9G series of sickle bar mower takes advantage of the offset crank link mechanism to drive the cutter blade mow grass, and it is adequate for cutting the natural and planted grasses in ranch, mountain and hilly area. The structure of this machine is compact and the operation is easy and reliable and the residues is lower after cutting.Modelunit9G-1.49G-1.69G-1.89G-2.1Working widthmm1400160018002100Working depthmm50-80PTO Rotation speedr/min540PTO shaft  spline6 splineTotal weightkg120124128135Matched powerhp12-2015-2020-3020-30LinkageThree-point suspension I type
  Contacta ahora
Model9GDM-1.259GDM-1.359GDM-1.65Tractor power required (HP)25-4035-5045-60Cutting width (m)1.251.351.65Quantity of drum disc222Work efficiency (km/h)151515Quantity of blades 666Cutting blade size (mm)47*100*347*100*347*100*3Cutting blade material 65Mn65Mn65MnPTO rotation speed (r/min)540540540Drum rotation speed (r/min)162016201620Overall dimension (mm)2300*800*10502400*850*10503000*900*1100Weight(Kg)330350448
  Contacta ahora
Model 9G series of sickle bar mower takes advantage of the offset crank link mechanism to drive the cutter blade mow grass, and it is adequate for cutting the natural and planted grasses in ranch, mountain and hilly area. The structure of this machine is compact and the operation is easy and reliable and the residues is lower after cutting. Modelunit9G-1.49G-1.69G-1.89G-2.1Working widthmm1400160018002100Working depthmm50-80PTO Rotation speedr/min540PTO shaft  spline6 splineTotal weightkg120124128135Matched powerhp12-2015-2020-3020-30LinkageThree-point suspension I type
  Contacta ahora
1GQN series of rotary tiller is adopted middle gear transmission system, mounted with the tractor though the 3 point  suspension Tractor’s wheel tracks are completely covered after tillage as the working width is much wider. The quality is reliable and the performance is well.  This cultivator can be used on dry and paddy field.
  Contacta ahora
1GQN series of rotary tiller is adopted middle gear transmission system, mounted with the tractor though the 3 point  suspension Tractor’s wheel tracks are completely covered after tillage as the working width is much wider. The quality is reliable and the performance is well.  This cultivator can be used on dry and paddy field.
  Contacta ahora
Product descriptions from the supplierOverviewProduct Description PRODUCT DESCRIPTIONAgricultural tractor mounted soybean corn planting machine corn seed planterThis corn planter for tractor is matched with the four-wheel tractors from 30hp to 100hp, which is used for seeding the single seed accurately in one soil hole. The corn planter also sow the crystalline granule fertilizer while seeding. This planting machine can finish furrowing, fertilizing, seeding, covering earth, pressing simultaneously, the effect of single grain sowing is extremely accurate.
  Contacta ahora
Product descriptions from the supplierOverviewProduct Description PRODUCT DESCRIPTIONAgricultural tractor mounted soybean corn planting machine corn seed planterThis corn planter for tractor is matched with the four-wheel tractors from 30hp to 100hp, which is used for seeding the single seed accurately in one soil hole. The corn planter also sow the crystalline granule fertilizer while seeding. This planting machine can finish furrowing, fertilizing, seeding, covering earth, pressing simultaneously, the effect of single grain sowing is extremely accurate.
  Contacta ahora
Our corn /maize thresher is widely applied for livestock breeding, farms, and household use. It is used shelling Maize from cobs. The machine separates the kernels from the crops with an amazing speed without any breakage of the kernels as well as cobs.There are two types of power for them: diesel engine or electric motor. You can choose each type in your need.This maize  threshing machine is quite simple and having high output.
  Contacta ahora
Our corn /maize thresher is widely applied for livestock breeding, farms, and household use. It is used shelling Maize from cobs. The machine separates the kernels from the crops with an amazing speed without any breakage of the kernels as well as cobs.There are two types of power for them: diesel engine or electric motor. You can choose each type in your need.This maize  threshing machine is quite simple and having high output.
  Contacta ahora
3QL series ridger plough is mainly suitable for ridging after the tillage in the field for potato, beans, vegetables etc. it is convenient to adjust the angle, the high ridge and the ridging rows. It can be easily spaced (widened or narrowed) as per the crop requirement. The wings angle can be changed as per requirement. ModelUnit3QL-33QL-43QL-5Working widthMm250032003900Ridging spacingMm700~900Ridging heightMm150~250Matched powerHp6080100LinkageThree-point suspension   II type
  Contacta ahora
3QL series ridger plough is mainly suitable for ridging after the tillage in the field for potato, beans, vegetables etc. it is convenient to adjust the angle, the high ridge and the ridging rows. It can be easily spaced (widened or narrowed) as per the crop requirement. The wings angle can be changed as per requirement.ModelUnit3QL-33QL-43QL-5Working widthMm250032003900Ridging spacingMm700~900Ridging heightMm150~250Matched powerHp6080100LinkageThree-point suspension II type
  Contacta ahora
3QL series ridger plough is mainly suitable for ridging after the tillage in the field for potato, beans, vegetables etc. it is convenient to adjust the angle, the high ridge and the ridging rows. It can be easily spaced (widened or narrowed) as per the crop requirement. The wings angle can be changed as per requirement. ModelUnit3QL-33QL-43QL-5Working widthMm250032003900Ridging spacingMm700~900Ridging heightMm150~250Matched powerHp6080100LinkageThree-point suspension II type
  Contacta ahora
Product Description 4U series of sweet potato harvester is mounted with the tractor of 12-60hp with back power and side power output shaft.The working principle of this potato digger is that the digging shovel digs up the soil and crops through the impetus of the tractor.
  Contacta ahora
5TD series rice and wheat thresher, mainly used for threshing wheat, rice, soybeans, a feeding can reach more than wheat, wheat straw, chaff, wheat four separation, has a simple structure. Safe and reliable, easy maintenance, etc.ModelUnit5TD-1255TD-1005TD-705TD-50Fitted powerKW11-137.5-117.55.5-7.5Fitted powerHP1515128Total weightkg450420260150Rotating speed of the rollerr/min1000106012001400Fan rotating speedr/min250024002500Total loss rate%wheat ≤1.5         rice ≤3.0Breakage%≤1.5Impurity%≤2.0productivityKg/ kwh≤130
  Contacta ahora
5TD series rice and wheat thresher, mainly used for threshing wheat, rice, soybeans, a feeding can reach more than wheat, wheat straw, chaff, wheat four separation, has a simple structure. Safe and reliable, easy maintenance, etc.ModelUnit5TD-1255TD-1005TD-705TD-50Fitted powerKW11-137.5-117.55.5-7.5Fitted powerHP1515128Total weightkg450420260150Rotating speed of the rollerr/min1000106012001400Fan rotating speedr/min250024002500Total loss rate%wheat ≤1.5         rice ≤3.0Breakage%≤1.5Impurity%≤2.0productivityKg/ kwh≤130
  Contacta ahora
Disc plough is matched with four-wheel tractor, the discs of plough are revolving to furrow the land during operation.. The mounted disc plow is especially suitable for land which have weeds, stems and frictional soil with small brick etc.Modelunit1LYX-2301LYX-3301LYX-4301LYX-530Working widthmm60090012001500Working depthmm250~300Q’ ty of disc2345Total weightkg300440490550Matched powerhp4060100130LinkageThree-point suspension II type
  Contacta ahora
1LF hydraulic reversible plow is mounted with four-wheel tractor; it is used for the loam,sand loam , cultivated and dry land ,it can finish the furrowing work in double way.Model1LF-3301LF-4301LF-5301LF-3351LF-4351LF-535Working widthmm90012001500105014001750Working depthmm220-270Number of bottoms68106810Total weightkg5807509506208001000Matched powerhp507080557590LinkageThree-point suspension II type ,hydraulic output(difunctional oil cylinder),oil connection in 1/2” thread
  Contacta ahora
1)Wet cylinderThe location bores and particularly the running surfaces in the cylinder block must be cleaned carefully and they must be undamaged. Corroded surfaces must be reworked (used flange liners and outer diameter oversize liners). As this is done, make sure that the liners moves in easily and that they take up the correct position (the projecting length of the liner must be in accordance with the regulations of the engine manufacture).
  Contacta ahora
9GL hay rake, matching with a small four-wheel tractor, is mainly used for the hay collecting operations after mowing. The implement adopts a hydraulic overturning mechanism and spring steel rake fingers. During the working process, the rake fingers can be overturned by the hydraulic overturning mechanism so as to realize the offloading of the hay. ModelUnit9GL-1.49GL-1.69GL-1.89GL-2.1Working widthmm1400160018002100Total weightkg9095100110Matched powerhp15-30Linkage2 point to support , tipping single action oil cylinder oil connection in 1/2”thread 
  Contacta ahora
This series of hay rake is mounted on the 4wheel tractor,  the material of tine is 65Mn spring steel to keep durable. this machine has simple structure, convenient operation and reliable use, less failure and high efficiency.  operation quality Maintenance is simple, dynamic performance is good. Both can hug grass, and ted the grasses.
  Contacta ahora
9GL hay rake, matching with a small four-wheel tractor, is mainly used for the hay collecting operations after mowing. The implement adopts a hydraulic overturning mechanism and spring steel rake fingers. During the working process, the rake fingers can be overturned by the hydraulic overturning mechanism so as to realize the offloading of the hay.ModelUnit9GL-1.49GL-1.69GL-1.89GL-2.1Working widthmm1400160018002100Total weightkg9095100110Matched powerhp15-30Linkage2 point to support , tipping single action oil cylinder oil connection in 1/2”thread
  Contacta ahora
9GL hay rake, matching with a small four-wheel tractor, is mainly used for the hay collecting operations after mowing. The implement adopts a hydraulic overturning mechanism and spring steel rake fingers. During the working process, the rake fingers can be overturned by the hydraulic overturning mechanism so as to realize the offloading of the hay.ModelUnit9GL-1.49GL-1.69GL-1.89GL-2.1Working widthmm1400160018002100Total weightkg9095100110Matched powerhp15-30Linkage2 point to support , tipping single action oil cylinder oil connection in 1/2”thread
  Contacta ahora
This series of hay rake is mounted on the 4wheel tractor,  the material of tine is 65Mn spring steel to keep durable. this machine has simple structure, convenient operation and reliable use, less failure and high efficiency.  operation quality Maintenance is simple, dynamic performance is good. Both can hug grass, and ted the grasses.
  Contacta ahora
Relate News
Rotary tillage part is the most commonly used tillage part of micro-tiller, and the engine power drives the rotary tillage cutter shaft to rotate through the transmission device. Rotary tillage knife shaft is horizontally arranged, and several rotary tillage blades are arranged on the circumference of the knife shaft. The transmission of the knife shaft has two forms: middle transmission and side transmission.
Supplying high quality harrow and plough's spare parts, including discs, hubs, bearings, spacers, harrow shafts etc. We can also customize the parts according to sample or drawing. 
This 3QL series agriculture equipment furrow ridger gadget tractor ridger is suitable for ridging after the tillage in the farm area. It includes heavy duty tubular field body, the complete device is made a lot stronger than everyday ones. This ridger is suitable for ridging after the tillage inside the field for potato, beans, vegetable etc.It is convenient to regulate the ridging top and the ridging rows and space between every ridge. It could be effortlessly spaced (widened or narrowed) consistent with the crop requirement. The rubber tires may be moved without problems.
I. Adjustment of tillage depth of deep ploughing plough:Generally speaking, the tillage depth of deep ploughs should not be less than 10cm. Rotary tiller matched with walking tractor can adjust the depth of cultivated land by changing the height of tail wheel. When adjusting, just turn the adjusting handle.The ploughing depth is controlled by the hydraulic system of the deep ploughing machine matched with the wheeled tractor.
1. At the beginning of the work, the Rototiller should be in the state of lifting, first combined with the power output shaft, so that the rotation speed of the cutter shaft increased to the rated speed, and then decreased the Rototiller, so that the blade gradually buried to the required depth. It is forbidden to combine the blade with the power output shaft or down the Rototiller after the blade is buried, so as not to cause the blade to bend or break and increase the load of the tractor. 2.
This 3QL series agriculture machinery furrow ridger machine tractor ridger is suitable for ridging after the tillage in the farm field. It consists of heavy duty tubular box frame, the whole machine is made much stronger than regular ones. This ridger is suitable for ridging after the tillage in the field for potato, beans, vegetable etc. It is convenient to adjust the ridging height and the ridging rows and space between each ridge. It can be easily spaced (widened or narrowed) according to the crop requirement. The rubber tires can be moved easily.
The working part is a Rotary Tiller with 2 ~ 3 spiral cutters. During the operation, the Rotary Tiller rotates around the vertical axis and the cutter cuts the soil into pieces. The utility model is suitable for paddy field hydroponic cultivation, and has strong soil crushing and pulp action, but poor covering performance. Used more in Japan. In order to enhance the effect of Rototiller, various additional devices have been installed on the rototiller in some countries.
 5TY Series Corn Thresher, when working, the corn is fed by the feed mouth, the corn is hit in the high speed rotating rotor and the drum, the kernel is separated by the sieve hole, the corn core is discharged from the tail of the machine, the corn silk, the skin is discharged from the tuyere. The feed hole is arranged on the upper cover of the machine. The corn stick enters the threshing chamber through the feed hole. The corn grains are knocked off by the high-speed rotating rotor in the threshing chamber and separated through the sieve holes.
Potato harvesters are a outstanding manner to store guide labour throughout potato harvest. Before the discovery of the potato harvester, maximum human beings dug their potatoes from the floor the use of a fork or a spade. Then they lifted the potatoes from the floor and positioned them right into a basket earlier than tipping them right into a hessian fabric bag to be stored. Potatoes are commonly grown in drills or beds, this facilitates the harvester dig a good width of soil and potatoes because it movements alongside the field.
What is a disc plough used for?The disc plough is designed to work in all types of soil for functions such as soil breaking, soil raising, soil turning and soil mixing. It is used to open the new fields and to process the stony areas. It can be used easily at rocky and rooted areas.