bearing-manufacture,factory,supplier from China

The half shaft is used to transfer power between the differential and the drive wheels. The half shaft of a regular non disconnecting drive axle can be divided into three types: fully floating, 3/4 floating, and semi floating depending on the external support form.Expand the information on car drive shafts and design a transmission device for driving wheels located at the end of the car's transmission system. Its function is to transmit torque from the differential half shaft gear to the driving wheels.

Install bridge bearings on the half shaft to attenuate vibration and protect the half shaft and other components.The half shaft (drive shaft) is subjected to alternating stresses such as torsion, shear, tension and compression, and impact, which can also cause torsional and bending vibrations of the drive shaft, resulting in additional stresses; Uneven stress distribution; There is sliding friction between the drive shaft neck and the bearing.The shaft that transfers torque between the half shaft gearbox reducer and the drive wheel (previously mostly solid, but due to the easier control of une

Product descriptions from the supplierOverview            Agricultural machine parts disc harrow bearing house brazil bearing assembly          Product DescriptionDuo-Cone mechanical seals.Taper roller bearings to absorb load in two ways - axial & radial.Low maintenance.Long life span.Total length 178-248mm, Weight 12-24kg

Agricultural Disc Harrow Oil bathed bearing assembly  PRODUCT OVERVIEW   

1.In general, the efficiency of using axle bearings is similar to that of power and lubrication bearings, but the rocker arm hybrid lubrication bearings are much higher.2. The radial clearance of the axle bearing is relatively small, and the radial angular contact bearing can be pre tightened with pre tightening force to eliminate the clearance, resulting in high performance during operation.Compared to bearings of the same type, axle bearings have a smaller width and a compact structure.4.

Product descriptions from the supplier:PRODUCT DESCRIPTION:The half shaft is used to transfer power between the differential and the drive wheels. The half shaft of a regular non disconnecting drive axle can be divided into three types: fully floating, 3/4 floating, and semi floating depending on the external support form.Expand the information on car drive shafts and design a transmission device for driving wheels located at the end of the car's transmission system. Its function is to transmit torque from the differential half shaft gear to the driving wheels.

1.In general, the efficiency of using axle bearings is similar to that of power and lubrication bearings, but the rocker arm hybrid lubrication bearings are much higher.2. The radial clearance of the axle bearing is relatively small, and the radial angular contact bearing can be pre tightened with pre tightening force to eliminate the clearance, resulting in high performance during operation.Compared to bearings of the same type, axle bearings have a smaller width and a compact structure.4.

The half shaft is used to transfer power between the differential and the drive wheels. The half shaft of a regular non disconnecting drive axle can be divided into three types: fully floating, 3/4 floating, and semi floating depending on the external support form.Expand the information on car drive shafts and design a transmission device for driving wheels located at the end of the car's transmission system. Its function is to transmit torque from the differential half shaft gear to the driving wheels.

1.In general, the efficiency of using axle bearings is similar to that of power and lubrication bearings, but the rocker arm hybrid lubrication bearings are much higher.2. The radial clearance of the axle bearing is relatively small, and the radial angular contact bearing can be pre tightened with pre tightening force to eliminate the clearance, resulting in high performance during operation.Compared to bearings of the same type, axle bearings have a smaller width and a compact structure.4.

ItemHSTAY6075Working   width7500mmWorking   depth250-300mmNo. of   discs60 pcsDisc   dimension660*6mmBearing Bearing assembly type， 中孔43， 圆轴42Total   weight6100kgMatched tractor   power240hpLinkage Trailed

Disc harrow is mainly applicable to clean the crop residue before tillage, break the hardened soil and return the chopped straw to the soil, and  also can crash the soil after tillage and level the land.It can be used as tillage machine instead of plow on the cultivated land. With the efficient productivity, reasonable utilization of the power, great ability of cutting and shattering the soil , the soil surface is smooth and loosening after harrowing, it is well suitable for heavy clay soil, waste land and weedy field as well.

PRODUCT DESCRIPTION                                                Yucheng Hengshing Machinery Co.,Ltd, professionaly manufacture agricultural implements and spare parts including disc blades, harrow bearing assembly, harrow shaft, plough hubs etc. which are exported to more than 70 countries of America, Thailand, Bolivia, Chile, Peru, Australia, South Africa, Tanzania, Nigeria, Ghana, Sudan, Botswana, Zambia, Zimbabwe etc.

Strongest harrow machine heavy duty offset disc harrow  pull  type disc harrow Product DescriptionThis LCBB heavy duty offset disc harrow is designed according to the Europe standard.It adopts the features on hydraulic offset modular structure, built-bearing composite design, reasonable structure, bearing seal, long life, durable, easy to transport, easy to adjust, easy maintenance .This heavy duty offset disc harrow also can be used to clean the stubble before tillage ,  break the hardened and impervious soil surface, crush and spread straw into the field, shatter soil aft

Product descriptions from the supplierOverview Disc Harrow Spare Parts Disc Blade Boron Disc 26inch 28inch Notched Harrow blade    PRODUCT DESCRIPTION                                              Yucheng Hengshing Machinery Co.,Ltd, professionaly manufacture agricultural implements and spare parts including disc blades, harrow bearing assembly, harrow shaft, plough hubs etc.

LCBB series of heavy duty disc harrow was designed according to the Europe standard .It adopts the features on hydraulic offset modular structure,built-bearing composite design,reasonable structure, bearing seal, long life, durable, easy to transport, easy to adjust, easy maintenance.This heavy duty harrow also can be used to clean the stubble before tillage,break the hardened and impervious soil surface,crush and spread straw into the field, shatter soil after tillage, and level the land and preserve soil moisture.

The three point hitch mounted spring tine cultivator is one of the simplest and most useful cultivation and tillage tools you can own. The tractor mounted spring tine cultivator loosens the soil for quick and easy surface cultivation to easily prepare a seed bed for planting. The S-shaped tine spacing on the tool bar is adjustable to allow you to align the cultivator tines with your crop row spacing. The three point hitch mounted spring tine cultivator is available in widths of 5 ft., 6 ft., and 7 ft.

Model1LS-215Power12-18hp Hand tractorPloughing width (cm)40Ploughing depth (cm)12-18Quantity of disc2Net Weight40 KGS

1LF hydraulic reversible plow is mounted with four-wheel tractor; it is used for the loam,sand loam , cultivated and dry land ,it can finish the furrowing work in double way.Model1LF-3301LF-4301LF-5301LF-3351LF-4351LF-535Working   widthmm90012001500105014001750Working   depthmm220-270Number of   bottoms68106810Total   weightkg5807509506208001000Matched   powerhp507080557590LinkageThree-point   suspension II type ,hydraulic output(difunctional oil cylinder),oil   connection in 1/2” thread

1BZ series of Hydraulic offset heavy disc harrow is well suitable for heavy clay soil, waste land and weedy field as well ,mainly suitable for stubble cleaning before farming , it can break the hardened soil and  return the chopped straw to the soil, and  also can crash the soil after tillage and level the land. The heavy-duty disc harrow can cultivate the soil instead of plow. ModelUnit1BZ-1.81BZ-2.21BZ-2.51BZ-3.01BZ-3.41BZ-4.01BZ-5.3Working widthmm1800220025003000340040005300Working depthmm200Q’ty of disc16202428323648Total weightkg1160125013501430155019002

Opposed heavy duty disc harrow is well suitable for heavy clay soil, waste land and weedy field as well,mainly suitable for stubble cleaning before farming , it can break the hardened soil and  return the chopped straw to the soil, and  also can crash the soil after tillage and level the land.The heavy-duty disc harrow can cultivate the soil instead of plough. ModelUnit1BZD-2.51BZD-2.81BZD-3.3Working widthmm250028003300Working depthmm180-200Q’ty of disc202428Total weightkg180020002500Matched powerhp90-120120-150160LinkageTrailed;hydraulic output 1 type(difunctional oil

1BZ series of Hydraulic offset heavy disc harrow is well suitable for heavy clay soil, waste land and weedy field as well ,mainly suitable for stubble cleaning before farming , it can break the hardened soil and  return the chopped straw to the soil, and  also can crash the soil after tillage and level the land. The heavy-duty disc harrow can cultivate the soil instead of plow.ModelUnit1BZ-1.81BZ-2.21BZ-2.51BZ-3.01BZ-3.41BZ-4.01BZ-5.3Working widthmm1800220025003000340040005300Working depthmm200Q’ty of disc16202428323648Total weightkg1160125013501430155019002500Mat

1BZ series of Hydraulic offset heavy disc harrow is well suitable for heavy clay soil, waste land and weedy field as well ,mainly suitable for stubble cleaning before farming , it can break the hardened soil and  return the chopped straw to the soil, and  also can crash the soil after tillage and level the land. The heavy-duty disc harrow can cultivate the soil instead of plow. ModelUnit1BZ-1.81BZ-2.21BZ-2.51BZ-3.01BZ-3.41BZ-4.01BZ-5.3Working widthmm1800220025003000340040005300Working depthmm200Q’ty of disc16202428323648Total weightkg1160125013501430155019002